Content

• The gate does not open or close completely

• The drive works, but does not lift the gate.

• The drive and gate are not functioning.

• Automatic opening of the gate immediately after closing

• Gate freezing

• Vibration occurs when opening and closing

• Torsion spring rupture

• What other breakdowns are possible?

Installing sectional doors is an excellent option for creating a garage opening, as well as an entrance to a warehouse, hangar, production facility, etc. Even if everything is installed correctly, a malfunction will eventually occur. This can be due to power outages, metal corrosion, ground subsidence, or other circumstances. There are several common causes of malfunction, some of which can be repaired independently. For others, you'll need to call a professional Garage Door Repair Expert who can make all the necessary adjustments and restore the unit to working order.

The gate does not open or close completely

A common sectional door malfunction is incomplete opening or closing. This problem can have several causes:

• malfunctions in the electrical network;

• failure of engines and amplifiers;

• system overload due to ground subsidence or other cause.

Determining the cause of the problem can be done simply. Close the gate tightly, then disable the automatic control, switching to manual operation. Then, attempt to open the device manually. It should lock in any position you stop it in. If the device doesn't, is excessively heavy, or is too heavy to lift, the likely cause is a faulty spring. Replace it, and functionality will be restored.

The drive works, but does not lift the gate.

When using sectional overhead doors, you may encounter a problem where the motor operates, but the entire structure doesn't open. If you hear noise coming from the motor, you're confident the power is connected, indicating the problem lies elsewhere.

A common cause of this type of malfunction is a blocked mechanism. First, check that all moving parts are free of foreign objects that could interfere with the normal operation of the entire unit. Also, check for loose metal transmission connections.

Another cause of malfunction in this situation could be spring failure. In this case, the motor bears the brunt of the load. It may perform its function several times, after which its performance will be reduced, and the gate will no longer open.

The drive and gate are not functioning.

Sometimes, a situation arises where all the mechanisms stop working altogether. In this case, it's important to determine which part of the entire structure is malfunctioning. To do this, open the gate manually, which will reveal which part is faulty— the automatic mechanism or the gate itself. You can also determine this by inspecting the spring—if its deflection is significant (5-7 cm), the problem lies within it. Simply replace the spring (preferably with the gate closed), and you're ready to use.

There are also several simple reasons why the door won't open that should be checked. Often, this problem is caused by a dead battery in the remote control or a power outage. Check these points, as they may be the cause.

Automatic opening of the gate immediately after closing

A fairly common problem related to incorrect drive limit settings or malfunctioning photocells. It's important to ensure there are no foreign objects in the opening that trigger the sensors. If none are found, the cause should be looked for elsewhere.

Solving this problem requires the intervention of an Automatic garage door repair Dubai technician who can check the photocells and limit settings. Self-intervention can lead to even greater problems.

Gate freezing

A problem that often arises during the cold season. The solution to this problem is extremely simple: simply pour moderately hot water over the bottom of the structure and wait a bit, after which the problem will disappear without a trace.

Using boiling water in this situation is inappropriate. It may cause deformation of the product and lead to its malfunctioning in the future.

Vibration occurs when opening and closing

A common problem that almost every gate owner regularly encounters. The cause of this malfunction is loose nuts and bolts. To resolve the issue, simply tighten these parts.

Torsion spring rupture

If this unit fails, the gate will not open. The only solution is to replace the spring completely. This problem is usually uncommon, but it can be quite annoying.

What other breakdowns are possible?

A number of other problems may arise that will impact the entire system in one way or another. Other potential issues include:

• sectional doors do not close completely;

• vibration and extraneous noise when opening or closing;

• combustion of the capacitor, resulting in smoking of the power unit;

• lighting problems.

Any of these possible scenarios can arise at any time, requiring repair or replacement of components. Remember that repairs to some components are best left to professionals, especially electronics and the engine.

Trust your repairs to Garage Door Repair Dubai professionals, as this will significantly extend the structure's functionality for decades to come. Your gates will last a long time if you pay sufficient attention to them.